Solve BMW ISTA Error ICH-0010 Vehicle Cannot Identify Problem


Solve BMW ISTA Error ICH-0010 Vehicle Cannot Identify Problem
3 kinds of BMW ISTA errors and solutions you may need:
1.ISTA NCS error “IFH-0010” + solution
2.ISTA error “MSVCP120.dll” missing + solution
3.ISTA error “Vehicle not recognized” + Solution

Note: All errors and solutions here are suitable for BMW ICOM A2 and BMW ICOM NEXT


ISTA error: Communication failure during activation
Error Status: Incorrect ECU Condition or Request Sequence Error
Incorrect status: Try setting the COM port delay to 1 in the advanced settings of the port. You should change it to 1 to have minimal hysteresis and interference between data transfers.

2. Missing BMW ISTA system error “MSVCP120.dll”

The program cannot start because MSVCP120.dll is missing from your computer

Workaround: Reinstall the VC++ redistributable and try again. If you are using X64, you need to install the X86 and X64 bit versions.
Feedback: Please install the old version of VC++ to get this .dll error.

3. BMW ISTA error “Vehicle not recognized”

Please check the traffic condition of the vehicle and check whether the test analysis has been activated.
Solution 1: Change the COM port to port 1, which is worth a try. If it doesn’t work, it’s easy to change.
Solution 2: Uncheck Ethernet Box and ICOM A2 ISTA-D

Feekback: Change COM9 to COM1, it’s working!